Kerbside Loading Permits - Perth City Bylaw

Transportation Western Australia 4 Minutes Read · published February 11, 2026 Flag of Western Australia

Kerbside loading activity in Perth, Western Australia, is governed by local council controls and, where state roads are affected, by state road-occupation rules. Traders and delivery operators must understand permit pathways, on-street restrictions, and enforcement processes before loading or unloading from kerbsides, footpaths or road reserves within the City of Perth area. This guide summarises typical application steps, likely compliance obligations, enforcement routes and practical tips for traders organising kerbside loading in Perth.

Overview of Kerbside Loading Permits

Councils regulate the use of the road reserve, footpath and kerb space to protect pedestrian safety and traffic flow. In Perth the local government issues permits or licences for temporary kerbside loading, footpath trading or road occupation; state agencies issue road-occupation permits where state-controlled roads are involved. Traders should confirm whether the proposed activity is on a local road reserve or a state road and apply to the responsible authority.

Penalties & Enforcement

Penalties and enforcement are administered by the local council’s compliance or parking enforcement teams for council roads, and by the state road authority for state roads. Specific penalty amounts for unauthorised kerbside loading are often set out in the local government’s parking or local laws or in notices issued by the enforcing authority.

  • Fine amounts: not specified on the cited page.
  • Escalation: first, repeat and continuing offence ranges are not specified on the cited page.
  • Non-monetary sanctions: directions to remove vehicles or equipment from the kerb, infringement notices, orders to cease activity, and court prosecution may apply.
  • Enforcer: local council compliance/parking officers or the state road authority where a state road is affected.
  • Appeals and review: internal review and statutory appeal routes may be available; time limits for lodging appeals are not specified on the cited page.
Always confirm penalties and appeal time limits with the issuing authority before proceeding.

Applications & Forms

Application names, form numbers and fees vary by authority. For local kerbside loading in Perth you will typically need a temporary road/footpath occupation or street-trading application from the City of Perth or the relevant local government; for state roads a Road Occupancy Permit from the state road authority is required. Specific form names, reference numbers and fees are not specified on the cited pages.

  • Typical application purpose: temporary loading bay or short-term road reserve occupation for loading/unloading.
  • Deadlines: apply well in advance of the proposed activity; minimum lead times are not specified on the cited pages.
  • Fees: councils may charge application and inspection fees; exact fees are not specified on the cited pages.
Make contact with the relevant council parking or compliance team early in planning to confirm forms and timeframes.

Compliance Steps for Traders

  • Identify whether the work affects a council road or a state-controlled road.
  • Contact the local council compliance or parking team for permit requirements and forms.
  • Where required, obtain a Road Occupancy Permit from the state road authority for state roads or arterial routes.
  • Comply with any conditions on the permit, including signage, marshals, and safety measures.
Operating without a required permit may lead to removal orders, fines or prosecution.

Action Steps

  • Check jurisdiction: confirm whether the kerbside is under local council or state control.
  • Apply: complete the local council or state application and attach required site plans.
  • Pay: pay any application or permit fees as required by the issuing authority.
  • Appeal: use the issuing authority’s review or appeal process if a permit is refused or conditions are disputed.

FAQ

Who issues kerbside loading permits in Perth?
The local council issues permits for council roads; the state road authority issues road-occupation permits for state-controlled roads.
How long does it take to get a permit?
Processing times vary by authority and application complexity; specific lead times are not specified on the cited pages.
What if a delivery is urgent and I have no permit?
Contact the local council or road authority immediately; unauthorised activity risks fines and removal orders.

How-To

  1. Confirm the exact location of the loading activity and whether the road is council or state controlled.
  2. Contact the local council parking/compliance unit to request the correct application form and list of required documents.
  3. Prepare a site plan, risk controls and traffic-management measures as required by the application checklist.
  4. Submit the application and pay any fees to the issuing authority well before the planned activity.
  5. If approved, display the permit on-site as required and comply with all permit conditions during the operation.
  6. Keep records of the permit and any correspondence in case of enforcement queries or appeals.
Retain evidence of approval on-site while loading to avoid unnecessary enforcement action.

Key Takeaways

  • Determine whether the kerbside is a council road or a state road before applying.
  • Apply early and comply with permit conditions to reduce enforcement risk.
  • Penalties and appeal time limits should be checked directly with the issuing authority.

Help and Support / Resources

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data